diff --git a/src-sh/void-install-zfs.sh b/src-sh/void-install-zfs.sh
deleted file mode 100755
index d3c0244..0000000
--- a/src-sh/void-install-zfs.sh
+++ /dev/null
@@ -1,287 +0,0 @@
-#!/bin/bash
-
-
-exit_err(){
-  if [ $1 -ne 0 ] ; then
-    echo "[ERROR] $2"
-    exit 1
-  fi
-}
-
-if [ ! -e "/bin/zpool" ] ; then
-  #Need to install the zfs package first
-  echo "[ERROR] The zfs package/tools are not available on this ISO!!"
-  exit 1
-fi
-
-#Main setting - just pick a disk
-DISK=""
-clear
-echo "================="
-echo "Project Trident Installer"
-echo "================="
-while [ -z "${DISK}" ]
-do
-  echo "-------------------"
-  sfdisk -l | grep "Disk /dev/" | grep -v "/loop" | cut -d , -f 1 | cut -d / -f 3-
-  echo "-------------------"
-  echo "Type the name of the disk to use (\"sda\" for example)], followed by [ENTER]: "
-  read -p "Disk: " DISK
-  if [ $? -ne 0 ] ; then exit 1 ; fi
-  if [ ! -e "/dev/${DISK}" ] ; then
-    echo "Invalid Disk: ${DISK}"
-    DISK=""
-  else
-    # Confirm that the user wants to destroy all the current contents of this disk
-    echo "WARNING: This will destroy all current contents on this disk."
-    read -p "Type \"yes\" to proceed: " CONFIRM
-    if [ "yes" = "${CONFIRM,,}" ] ; then
-      DISK="/dev/${DISK}"
-    else
-      #Return to selection
-      DISK=""
-    fi
-  fi
-done
-
-# This script was influenced by https://wiki.voidlinux.org/Manual_install_with_ZFS_root
-HOSTNAME="tri-void"
-BOOTDEVICE="${DISK}"
-ZPOOL="trident"
-REPO="http://alpha.de.repo.voidlinux.org/current/musl"
-PACKAGES=""
-INITBE="initial"
-#Full package list
-#PACKAGES_CHROOT="iwd bluez vlc trojita telegram-desktop falkon qterminal openvpn git pianobar ntfs-3g fuse-exfat simple-mtpfs fish-shell zsh libdvdcss gutenprint foomatic-db foomatic-db-nonfree nano xorg-minimal lumina"
-#Minimal package list for testing
-PACKAGES_CHROOT="iwd bluez nano xorg-minimal lumina qterminal git"
-SERVICES_ENABLED="dbus sshd dhcpcd cupsd wpa_supplicant"
-MNT="/run/ovlwork/mnt"
-CHROOT="chroot ${MNT}"
-## Some important packages
-## intel-ucode ?
-
-if [ ! -d "${MNT}" ] ; then
-  mkdir -p "${MNT}"
-  exit_err $? "Could not create mountpoint directory: ${MNT}"
-fi
-
-echo "repository=${REPO}" > /etc/xbps.d/repo.conf
-export XBPS_ARCH=x86_64-musl 
-#xbps-install -y -S
-#exit_err $? "Could not contact package repository!! Fix networking and try again (no changes to disks yet)."
-
-#Check if we are using EFI boot
-efibootmgr > /dev/null
-if [ $? -eq 0 ] ; then
-  #Using EFI
-  BOOTMODE="EFI"
-else
-  BOOTMODE="LEGACY"
-fi
-echo "Formatting the disk: ${BOOTMODE} ${DISK}"
-sfdisk -w always ${DISK} << EOF
-	label: gpt
-	,100M,U
-	,1M,21686148-6449-6E6F-744E-656564454649,*
-	;
-EOF
-exit_err $? "Could not partition the disk: ${DISK}"
-EFIDRIVE="${DISK}1"
-BOOTDRIVE="${DISK}2"
-SYSTEMDRIVE="${DISK}3"
-
-#Formatting the boot partition (FAT32)
-mkfs -t msdos ${EFIDRIVE}
-
-# Setup the void tweaks for ZFS 
-# Steps found at: https://github.com/nightah/void-install
-xbps-reconfigure -a
-modprobe zfs
-exit_err $? "Could not verify ZFS module"
-
-ip link sh | grep ether | cut -d ' ' -f 6 | tr -d ":" >> /etc/hostid
-
-echo "Creating ZFS Pool: ${ZPOOL}"
-zpool create -f -o cachefile=/tmp/zpool.cache -o ashift=12 -d \
-		-o feature@async_destroy=enabled \
-		-o feature@bookmarks=enabled \
-		-o feature@embedded_data=enabled \
-		-o feature@empty_bpobj=enabled \
-		-o feature@enabled_txg=enabled \
-		-o feature@extensible_dataset=enabled \
-		-o feature@filesystem_limits=enabled \
-		-o feature@hole_birth=enabled \
-		-o feature@large_blocks=enabled \
-		-o feature@lz4_compress=enabled \
-		-o feature@spacemap_histogram=enabled \
-		-o feature@userobj_accounting=enabled \
-		-O acltype=posixacl \
-		-O canmount=off \
-		-O compression=lz4 \
-		-O devices=off \
-		-O mountpoint=none \
-		-O normalization=formD \
-		-O relatime=on \
-		-O xattr=sa \
-		${ZPOOL} ${SYSTEMDRIVE}
-exit_err $? "Could not create pool: ${ZPOOL} on ${SYSTEMDRIVE}"
-#Configure the pool now
-zfs set compression=on ${ZPOOL}
-zfs create -o canmount=off ${ZPOOL}/ROOT
-zfs create -o mountpoint=/ -o canmount=noauto ${ZPOOL}/ROOT/${INITBE}
-exit_err $? "Could not create ROOT dataset"
-
-zpool set bootfs=${ZPOOL}/ROOT/${INITBE} ${ZPOOL}
-exit_err $? "Could not set ROOT/${INITBE} dataset as bootfs"
-
-echo "Verify pool can be exported/imported"
-zpool export ${ZPOOL}
-exit_err $? "Could not export pool"
-zpool import -R ${MNT} ${ZPOOL}
-exit_err $? "Could not import the new pool at ${MNT}"
-#need to manually mount the root dataset (noauto)
-zfs mount ${ZPOOL}/ROOT/${INITBE}
-exit_err $? "Count not mount the root ZFS dataset"
-
-datasets="home var var/logs var/tmp var/mail"
-for ds in ${datasets}
-do
-echo "Creating Dataset: ${ds}"
-  zfs create -o compression=lz4 -o mountpoint=/${ds} ${ZPOOL}/${ds}
-  exit_err $? "Could not create dataset: ${ZPOOL}/${ds}"
-done
-
-dirs="boot/grub boot/efi dev etc proc run sys"
-for dir in ${dirs}
-do
-  mkdir -p ${MNT}/${dir}
-  exit_err $? "Could not create directory: ${MNT}/${dir}"
-done
-
-mount $EFIDRIVE ${MNT}/boot/efi
-exit_err $? "Could not mount EFI boot partition: ${EFIDRIVE} -> ${MNT}/boot/efi (${BOOTMODE})"
-
-
-dirs="dev proc sys run"
-for dir in ${dirs}
-do
-  mount --rbind /${dir} ${MNT}/${dir}
-  exit_err $? "Could not mount directory: ${MNT}/${dir}"
-done
-
-echo
-echo "Installing MUSL voidlinux, before chroot into it"
-# xbps-install -y -S --repository=${REPO} -r ${MNT} base-system grub ${PACKAGES} < "Y\r\n"
-xbps-install -y -S --repository=${REPO} -r ${MNT} base-system grub grub-i386-efi grub-x86_64-efi ${PACKAGES}
-exit_err $? "Could not install void packages!!"
-
-echo
-echo "copying a valid resolv.conf into directory, before chroot to get to the new install"
-if [ -e "/etc/resolv.conf" ] ; then
-  #Copy the current host resolv.conf (assume it is working)
-  cp /etc/resolv.conf ${MNT}/etc/resolv.conf
-fi
-
-#Now inject a couple always-working DNS nameservers into the end of resolv.conf
-echo "8.8.8.8" >> ${MNT}/etc/resolv.conf
-echo "8.8.4.4" >> ${MNT}/etc/resolv.conf
-#Also copy over the hostid file we had to create manually earlier
-cp /etc/hostid ${MNT}/etc/hostid
-cp /etc/xbps.d/repo.conf ${MNT}/etc/xbps.d/repo.conf
-
-echo "CHROOT into mount and finish setting up"
-
-echo "KEYMAP=\"us\"" >> ${MNT}/etc/rc.conf
-echo "TIMEZONE=\"America/New_York\"" >> ${MNT}/etc/rc.conf
-echo "HARDWARECLOCK=\"UTC\"" >> ${MNT}/etc/rc.conf
-echo ${HOSTNAME} > ${MNT}/etc/hostname
-
-echo "Setting up repositories"
-${CHROOT} xbps-install -y -S void-repo-nonfree
-exit_err $? "Could not install the nonfree repo"
-${CHROOT} xbps-install -y -S
-
-echo
-echo "Fix dracut and kernel config, then update grub"
-echo "hostonly=\"yes\"" >> ${MNT}/etc/dracut.conf.d/zol.conf
-echo "nofsck=\"yes\"" >> ${MNT}/etc/dracut.conf.d/zol.conf
-echo "add_dracutmodules+=\"zfs btrfs resume\"" >> ${MNT}/etc/dracut.conf.d/zol.conf
-${CHROOT} xbps-reconfigure -f linux5.2
-
-echo
-echo "Installing packages within chroot"
-mkdir ${MNT}/tmp/pkg-cache
-rm ${MNT}/var/cache/xbps/*
-for pkg in zfs ${PACKAGES_CHROOT}
-do
-  echo
-  echo "Installing package: ${pkg}"
-  ${CHROOT} xbps-install -y -c /tmp/pkg-cache ${pkg}
-  exit_err $? "Could not install package: ${pkg}"
-  rm ${MNT}/tmp/pkg-cache/*
-done
-echo
-#Now remove the temporary pkg cache directory in the chroot
-rm -r ${MNT}/tmp/pkg-cache
-
-echo
-echo "Auto-enabling services"
-for service in  ${SERVICES_ENABLED}
-do
-  echo " -> ${service}"
-  ${CHROOT} ln -s /etc/sv/${service} /var/service/${service}
-  exit_err $? "Could not enable service: ${service}"
-done
-
-#Now reinstall grub on the boot device after the reconfiguration
-if [ "zfs" != $(${CHROOT} grub-probe /) ] ; then
-  echo "ERROR: Could not verify ZFS nature of /"
-  exit 1
-fi  
-#Setup the GRUB configuration
-echo "
-GRUB_DEFAULT=0
-GRUB_TIMEOUT=5
-#GRUB_DISTRIBUTOR=\"Project Trident\"
-GRUB_DISTRIBUTOR=\"Project-Trident\"
-GRUB_CMDLINE_LINUX_DEFAULT=\"loglevel=4 elevator=noop\"
-GRUB_BACKGROUND=/usr/share/void-artwork/splash.png
-GRUB_CMDLINE_LINUX=\"root=ZFS=${ZPOOL}/ROOT/${INITBE}\"
-GRUB_DISABLE_OS_PROBER=true
-" > ${MNT}/etc/default/grub
-
-# to see if these help
-${CHROOT} zpool set cachefile=/etc/zfs/zpool.cache trident
-echo "to make sure zfs, btrfs, resume modules are loaded"
-${CHROOT} xbps-reconfigure -f linux5.2
-${CHROOT} lsinitrd -m
-
-echo " this is supposed to populate /boot/grub & /boot/efi"
-#Stamp GPT loader on disk itself
-#${CHROOT} grub-mkconfig -o {MNT}/boot/grub/grub.cfg
-${CHROOT} grub-install ${BOOTDEVICE}
-#Stamp EFI loader on the EFI partition
-${CHROOT} grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=void_grub --recheck --no-floppy
-# ${CHROOT} grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=void_grub --boot-directory=/boot --debug --no-floppy --recheck
-echo "========="
-echo "Final Steps: 1 / 2 - change root password"
-echo "========="
-passwd -R ${MNT}
-echo "========="
-echo "Final Steps: 2 / 2 - create user account"
-echo "========="
-
-
-echo "========="
-#Now unmount everything and clean up
-# umount -nfR ${MNT}/mnt/run/ovlwork/mnt/boot/efi
-umount -nfR ${MNT}/boot/efi
-umount -nfR ${MNT}/dev
-umount -nfR ${MNT}/proc
-umount -nfR ${MNT}/sys
-umount -nfR ${MNT}/var
-umount -nfR /run/ovlwork/mnt/
-zpool export ${ZPOOL}
-
-echo "[SUCCESS] Reboot the system and remove the install media to boot into the new system"